1.【机】齿;轮齿;(齿轮的)钝齿,嵌齿
2.【机】嵌齿论
3.从属于大组织的人
4.【建筑】雄榫,凸榫
5.小船;附属于大船的供应船
1.【机】齿;轮齿;(齿轮的)钝齿,嵌齿
2.【机】嵌齿论
3.从属于大组织的人
4.【建筑】雄榫,凸榫
5.小船;附属于大船的供应船
1.(在...上)装齿轮,(在...上)楔榫
2.(用假骰子)欺骗;行贿
1.[Mechanical Engineering]a projection on the edge of a gearwheel that engages with corresponding parts on another wheel to transfer motion from one wheel to the other
2.a wheel in a machine that fits into the edge of another wheel or part and makes it turn
3.someone considered as a minor part of a large organization
1.to join two timber beams with a cog
1.The cogging torque was the main factor that causes a PM stepping motor to be vibrated, noisy and even influences its safe operation.
齿槽转矩是引起永磁步进电机振动、噪声甚至影响其安全运行的主要因素。
2.This paper is concerned on studying the logging force and optimizing the sleeve length of the iron- cored to reduce the cogging force.
该文通过对电机定位力的分析并通过优化电机铁心的轴向长度，使其定位力得到有效抑制。
3.Since the LSR to be detected with cogging structure, which makes the gap sensor's output with cogging effect.
由于被检测体长定子轨道具有齿槽结构，使得传感器的输出具有齿槽效应。
4.However, the interaction between the permanent magnet and slotted armature lamination produces cogging, which may cause noise and vibration.
然而由于永磁体与有槽铁心相互作用，产生齿槽转矩，引起振动和噪声。
5.Cogging torque is one of the main concerns of permanent magnet motor.
齿槽转矩的削弱一直是永磁电动机研究的重点之一。
6.The cogging torque can be reduced efficiently by suitable selection of the relative angle between dual stators .
选择合适的内外定子相对位置，可有效地削弱齿槽转矩。
7.Stepped magnet configuration with approximate skew strategy is then applied to reduce the cogging torque and start wind speed.
另于转子部分采用步阶磁石的方式作等效斜列，将进一步降低顿转矩含量及起动风速。
8.Step skewing of rotor magnets is an efficient manner for reducing harmonics and minimizing cogging torque and torque ripple.
转子分段斜极是一种能有效削弱齿谐波、改善电机齿槽转矩和转矩脉动的方法。
9.Cogging torque is one of the most important parameters of PM motors, which causes torque ripple, vibration and acoustic noise.
齿槽转矩是永磁电机最重要的参数之一，它的存在会造成电机的转矩波动、振动和噪声。
10.The first stage is called primary rolling, or cogging.
这个阶段叫作初轧或开坯。